#SHORE POWER CONVERTER HOW TO#
#SHORE POWER CONVERTER CRACKED#
#SHORE POWER CONVERTER FREE#

I used a 2 inch hole saw to create a smooth edged hole and it cut through the thin metal of my van like butter. I installed painter’s tape in the spot I would be marking and drilling so that I wouldn’t accidentally scratch the paint in the vicinity of where I was working. For the plug that I purchased, and recommend, it required a 2-inch hole. The next thing that you will need to do is mark the location and drill a hole that the power plug will fit into. I decided in the end that it didn’t matter where I put it because with a 50-foot extension cord, I will be able to connect to a power pole no matter where it is located in the Campground parking spot. However, for my van, I wanted it on the passenger’s side because that is the most convenient place for my particular van conversion. After researching motorhomes, I found that most often they are located on the driver’s side of the rig.

#SHORE POWER CONVERTER FREE#

It doesn’t matter where you put it as long as it is in a convenient location for you and it comes through to the inside of the van in a place that is free from obstructions.Īt first, I wondered which side the plug should be on. The first step to installing this type of shore power socket in a van is to figure out exactly where you want it to be.

#SHORE POWER CONVERTER HOW TO#

How To Install Shore Power In A Van – The Simple Way Step 1 – Figure Our Where To Put It You can also choose to use a 30 amp plug so that you are able to run items that draw more power such as heaters, air conditioners, irons and other items that might be too much of a power draw for the solar system that you might have installed. This simple product works perfectly for me because I only use it occasionally and for items that don’t draw a lot of power. It gives me a neat way to electrify my van while I’m safely tucked inside.

#SHORE POWER CONVERTER CRACKED#

NOCO 15 Amp 125V AC Port Plug Power Inletīy using this adapter, the extension cord doesn’t have to be brought in through an open door or cracked window. Essentially, this becomes a way for me to run an extension cord into my van. The product that I ended up installing in my van conversion is a basic 15 amp plug that has standard extension cord leads on the back of it. I stumbled upon a simple solution during my research and I am glad that I went with this solution in the end. I wanted to be able to do it myself and not make a big deal of it. I don’t know a whole lot about electricity and did not want to hire it out. I chose to install a simple but effective shore power solution in my conversion van. If you are like me and intend on using solar for your primary electricity source, you probably don’t need a complicated shore power set up. The same can be done in a camper van and as you convert your van, it’s a good idea to include this in your plans. With these connections, they are able to plug-in to power poles at campgrounds and enjoy electricity throughout their RV. Most RVs are equipped with shore power connections. Although many people choose solar for the primary electrical source in their van, it can be very helpful to also have a second source of electricity. Shore power can be an important part of a van conversion if you want to be able to have electricity in your van. This means that I may earn a small commission if you click on them and make a purchase. Disclosure: Some of the links in the article below may be affiliate links.

Shore power converter